Location > Perma-Pipe Middle East

Perma-Pipe Middle East

Perma-Pipe Middle East

Available products:
XTRU-THERM®

XTRU-THERM®, our "State of the Art" preinsulated piping system for fluids from cryogenic temperatures up to 250ºF. The extruded HDPE jacket results in a completely bonded system that moves as a single unit for maximum efficiency and service life.
CHIL-GARD®

CHIL-GARD® is a cost effect factory preinsulated system for the underground chilled water and condenser water distribution. Gasketed bell joint construction accommodates pipe movement, eliminating expansion and contraction stresses wthin the system.
PAL-AT®

PAL-AT is a state of the art leak detection cable system that locates potential problems anywhere along the sensor string and alarms on contact.
FLUIDWATCH®

FLUIDWATCH® is a system designed to monitor small areas for water or waterbased chemicals on floors and around sensitive equipment. Typical applications are for sub floors and around boilers and pumps.
LIQUIDWATCH®

LIQUIDWATCH® is a system designed to monitor sensor probes in a wide variety of applications for water, hydrocarbons or chemicals in sumps around sensitive equipment, tanks and low points in secondary contained pipe systems.
Skin Effect Current Tracing

Skin Effect Current Heat Tracing is the most cost effective heat tracing design for long runs of pipe. The design can be furinished as a single end power feed or mid fed power feed design on preinsulated pipe or field insualted pipe applications.
STEREO-HEAT® Impedence Heat Tracing

STEREO-HEAT® Impedance Heat Tracing is a direct current electric traced system across the ends of a steel or alloy pipeline section that provides even heat distribution on short to medium runs of preinsulated pipe.
Heat Tape Traced Systems

Heat Tape Traced Systems added to a preinsulated piping systems offers an economical and manitance free solution to any above or below grade fluid application that requires electric heat tracing.
XTRU-THERM® ULTRA LOW TEMPERATURE PIPING

XTRU-THERM® Cryogenic piping is a high density polyethylene jacketed, polyurethane foam insulated piping system for above ground and below ground distribution of cryogenic liquids and gases from -100°F to -320°F(-196°C).