Lited below is the full line of Perma-Pipe and PermAlert products. We have listed them in alphabetical order to make it easier to locate a familiar product. Simply click on the name of the product or image to see additional information.

.. Alphabetical Product & Service Listing
	Cathodic Protection Services	Cathodic Protection Services can provide complete system testing to insure that your CP system meets it's design life.
	CHIL-GARD®	CHIL-GARD® is a cost effect factory preinsulated system for the underground chilled water and condenser water distribution. Gasketed bell joint construction accommodates pipe movement, eliminating expansion and contraction stresses wthin the system.
	Coating Discontinuity Test	Coating Discontinuity Test provides a non-evasive approach to coating integrity for all buried and coated piping systems.
	COPPER-GARD	COPPER-GARD® is a completely factory-fabricated, preinsulated and jacketed copper piping system for hot and chilled water, condensate and domestic water distribution. It allows for quick installation of the underground distribution systems..
	DOUBLE-QUIK™	DOUBLE-QUIK™ is a modular secondary containment piping system available in polypropylene and high density polyethylene. Designed for chemical lines, chemical waste lines and for groundwater extraction systems for "Superfund" sites.
	DUAL-GARD 250®	DUAL-GARD 250® is a cost effective factory preinsulated system for the distribution of chilled water and hot water and condensate up to 250ºF.The system is provided with a FRP pipe inside a PVC outer jacket.
	DUAL-GARD DI®	DUAL-GARD DI® is a cost effect factory preinsulated system for underground chilled water and low temperature hot water distribution. A ductile iron carrier pipe provides high corrosion resistance for underground applications.
	ECONO-GARD™	ECONO-GARD™ is a contractor friendly product, designed to be completed in the field. Straight sections of pipe are factory insulated and jacketed for delivery to the jobsite ready for field insulation and jacketing of joints and fittings.
	Electronic Mapping	Electronic Mapping below grade pipe location is critical, our service provides detailed information on location and depth of metallic pipe.
	ESCON-A ®/ FERRO-SHIELD®	ESCON-A ®/ FERRO-SHIELD® is the original prefabricated, preinsulated piping system for the distribution of low to high pressure steam, high temperature hot water, and general fluid transportation systems.
	FluidWatch®	FluidWatch® is a system designed to monitor small areas for water or waterbased chemicals on floors and around sensitive equipment. Typical applications are for sub floors and around boilers and pumps.
	GALVA-GARD™	GALVA-GARD®, "The Ultimate Corrosion Fighter" is a prefabricated, preinsulated, fiberglass clad galvanized steel conduit system for low to high pressure steam, HTHW and general fluid transportation.
	Heat Tape Traced Systems	Heat Tape Traced Systems added to a preinsulated piping systems offers an economical and manitance free solution to any above or below grade fluid application that requires electric heat tracing.
	Infrared Energy Evaluation Survey	Infrared Energy Evaluation Survey economical service to locate and quantifie BTU loss in underground pipe systems.
	Infrared Leak Detection Survey	Infrared Leak Detection Survey is a economical non-evasive service that can locate areas of high thermal loss that are indicative of wet insulation due to conduit or service pipe leak.
	LiquidWatch®	LiquidWatch® is a system designed to monitor sensor probes in a wide variety of applications for water, hydrocarbons or chemicals in sumps around sensitive equipment, tanks and low points in secondary contained pipe systems.
	LO-TEMP HI-GARD®	LO-TEMP HI-GARD®, is a designed for the distribution of fluids aboveground at temperatures up to 250 ºF. Based on customers specifications, this is a prefabricated system with all fittings attached to straight sections.
	MID-TEMP HI-GARD®	MID-TEMP HI-GARD®, is designed for distribution of fluids aboveground at temperatures of 250º F and higher. Based on customer specifications, this is a prefabricated system with all fittings attached to straight sections.
	MULTI-THERM 500	Multi-Therm 500® is the best prefabricated, preinsulated piping system for the distribution of low to high pressure steam, high temperature hot water and general fluid transportation systems. The design eliminates corrosion and reduces energy loss.
	PAL-AT®	PAL-AT is a state of the art leak detection cable system that locates potential problems anywhere along the sensor string and alarms on contact.
	PEX-GARD™	PEX-GARD™ preinsulated pipe is designed for fast economical installation due to its long coil lengths and ability to be routed around obstructions. Bending PEX-Gard eliminates the need for costly and time consuming welded elbows.
	POLY-THERM™	POLY-THERM™ is the best system we offer. It is a fiberglass jacketed, polyurethane foam insulated piping system for above and belowground distribution of liquids from -320°F to 250°F.
	POLY-THERM™ ULTRA LOW TEMPERATURE PIPING	POLY-THERM™ Cryogenic Piping is a fiberglass jacketed, polyurethane foam insulated piping system for above and belowground distribution of liquids from -100ºF to -320ºF (-196ºC).
	Prefabricated Manholes	PERMA-PIPE'S prefabricated steel manholes reduce installation and maintenance cost over traditional concrete manholes. They are fully assembled and tested with all internal pipe and valves as required.
	Quik-Therm™	Quik-Therm is the right choice for a thermally efficient chilled water distribution system designed for fast and reliable installation. The preinsulated HDPE carrier pipe is inside an HDPE outer jacket and is 100% corrosion resistant.
	Skin Effect Current Tracing	Skin Effect Current Heat Tracing is the most cost effective heat tracing design for long runs of pipe. The design can be furinished as a single end power feed or mid fed power feed design on preinsulated pipe or field insualted pipe applications.
	Sonic Leak Detection Survey	Sonic Leak Detection Survey is an economical non-evasive detailed survey to locate, pinpoint and classify leaks on buried water distribution systems both hot and cold fluids.
	Stereo-Heat Impedence Tracing	Stereo-Heat® Impedance Tracing is a direct current electric traced system across the ends of a steel or alloy pipeline section that provides even heat distribution on short to medium runs of preinsulated pipe.
	TERRA-GARD™	TERRA-GARD™, is an economical choice for a preinsulated, prefabricated pipe and fitting system. The system is designed based on your system layout. The system consist of a carrier pipe, foam injected insulation and an outer jacket.
	Tracer Gas Survey	Tracer Gas Survey is an economical choice for locating leaks in secondary containment and heat distribution conduit system in a non-evasive survey
	Type HT®	Type HT® is an economical choice for a prefabricated, preinsulated secondary containment piping system for high temperature containment involving general fluid transportation. The system is carbon steel inside a carbon steel coated containment.
	Type IW®	Type IW® is a stainless or alloy x stainless, alloy prefabricated, secondary containment piping system for hazardous chemicals, process waste and general fluid transportation. It is used where fluid is corrosive.
	Type-FS®	Type FS® is a prefabricated, secondary containment piping system for chemicals, process waste, fuel systems and general fluid transportation. The containment pipe is fiberglass with no need for cathodic protection. Any carrier pipe type is permitted.
	ULTRA-FS®	ULTRA-FS® is an advanced prefabricated, secondary containment piping system for chemicals, process waste, fuel systems and general fluid transportation is a fiberglass clad steel conduit system with no need for cathodic protection.
	ULTRA-HT®	ULTRA-HT® is an advanced preinsulated secondary containment piping system for general fluid transportation that requires an insulated steel containment. No need for cathodic protection.
	ULTRA-IW®	ULTRA-IW® is an advanced prefabricated, secondary containment piping system for hazardous chemicals, process waste and general fluid transportation. It is a fiberglass clad stainless steel conduit system with no need for cathodic protection.
	Ultrasonic Testing Survey	Ultrasonic Testing Survey can provide you peace of mind by measuring the remaining thickness of your alloy pipe systems.
	Ultra-Therm™	ULTRA-THERM® is the next generation of prefabricated, preinsulated piping system for low to high pressure steam, HTHW and general fluid transportation is a fiberglass clad steel conduit system with no need for cathodic protection.
	Uniline Traced Piping Systems	Uniline® Traced Piping System is a muti-pipe bundled system that utilizes the heat from steam, hot water or electric heat tracing to provide the required operating temperature to heat fuel oil or chemicals in a economical design.
	Utilidor	Utilidor, is a rugged, prefabricated versatile tunnel for economically housing underground utility services. Utilidor can also be designed as a passage way between buildings
	XTRU-THERM™	XTRU-THERM™, our "State of the Art" preinsulated piping system for fluids from cryogenic temperatures up to 250ºF. The extruded HDPE jacket results in a completely bonded system that moves as a single unit for maximum efficiency and service life.
	XTRU-THERM™ ULTRA LOW TEMPERATURE PIPING	Cryogenic piping is a high density polyethylene jacketed, polyurethane foam insulated piping system for above ground and below ground distribution of cryogenic liquids and gases from -100°F to -320°F(-196°C).